Sikary Spod Starter Kit with powerbank

We present the Sikary SPOD Starter Kit with Powerbank 2200mah, the most effective smoking cessation device and full autonomy for the whole day.
Lightweight, with a stylish and modern design, it fits comfortably in your bag or pocket.

Stylish and lightweight

The device consists of 2 parts: a) Spod device and b) a stylish and lightweight 2200mAh Spod Powerbank that functions as a Spod carrying and recharging case. The Spod has no buttons, is activated by inhalation and automatically switches off immediately after use, making it safer to use and battery-saving. To charge, place it in the Powerbank, where it will light up on the side, informing you of the charging status of your device. Once the charge is complete, press the button on the side and you're ready to enjoy a unique vaping experience.

Charging to another level

Spod Powerbank is charged via a USB port on the side. During charging, the 4 lights inform you of the charging status. [4 lights lit mean 100% energy, 3 lights lit mean 75% energy, 2 lights lit mean 50% energy, 1 light lit indicates 25% energy]. Once the S-bank is finished charging, the 4 lights will stay on for 20 seconds.

Tip: To avoid battery be empty, check the battery level by pressing the button.

CAUTION:
When the battery of the SPOD device has not been recharged for a long time, the charging case will not be able to charge properly. In this case, press and hold the button for more than 10 seconds. The four LEDs will blink twice. The charging case will automatically charge the SPOD device as it enters forced activation mode. When the device voltage increases, it will return to normal charging state.

Powerful atomizer with protection

The atomizer has a capacity of 0.8ml and you can fill it with liquid of your choice. Its 2.0Ω coil provides you with good vape cloud production and pure taste.
It stands out for its tight and cigarette butt. Compatible with liquids 50pg / 50vg, 70vg / 30pg, nic-salts.

"Short-circuit protection: if the atomizer is short-circuited, it will no longer work and the LED will flash 3 times."
To fill, remove the specially designed mouthpiece and then fill it with the empty bottle you give it in the package. Place in the center and fill until the transparent container is filled with care that the liquid does not enter the central tube. Once the filling is complete, place the mouthpiece making sure that the two tabs are aligned with the bottom of the tank. Replace the silicone valve in the container.

Tip: We advise you to wait 10 'to fully absorb the liquid in the resistance cotton.

The package contains

x2 containers

x1 USB cable

x1 Battery charger

x1 Certificate of Authenticity

x1 SPOD device

x1 User Manual

x1 Dehumidifier bag